KINGRAY Sinoriko JM302 – 650 and 808 nm Laser Device
KINGRAY Sinoriko JM302 – 650 and 808 nm Laser Device
KINGRAY · SINORIKO · JM302
Red and infrared laser light in a handheld device
KINGRAY Sinoriko JM302 combines red laser light at 650 nm with infrared laser light at 808 nm. Its display-free design features control buttons and indicator lights.
Use the buttons to select the power level and timer setting. The rechargeable design allows operation without a continuous connection to the charger.
Simple button controls
- ON/OFF: switches the device on and off; a short press starts or pauses the light as described in the manual.
- POWER: selects a low, medium or high power level.
- TIMER: sets the timer to 5, 10, 15 or 20 minutes.
- Indicator lights: show the settings and charging status.
The timer setting does not determine the recommended duration of use on a single area. Follow the current manufacturer's instructions for the method and duration of use.
Technical specifications
| Model | JM302 |
|---|---|
| Red light | 650 nm |
| Infrared light | 808 nm |
| Number of light sources | 12 × 650 nm and 1 × 808 nm |
| Voltage stated in the manual | 3.6 V |
| Power levels | Low, medium and high |
| Timer | 5 / 10 / 15 / 20 minutes |
| Display | No display; indicator lights |
| Charging | USB cable and charger |
| Operating temperature according to the manual | 10 to 40 °C |
| Storage temperature according to the manual | −20 to 50 °C |
| Water resistance | The device is not waterproof |
Package contents
- Sinoriko JM302 device.
- USB cable.
- Charger.
- User manual.
Charging and battery care
Use the supplied accessories for charging. According to the manual, the red indicator shows charging in progress and the green indicator shows a full charge.
During extended periods of non-use, the manual recommends recharging the battery every 2 to 3 months.
Safety warnings
- Laser radiation – do not look directly into the light source or direct the light towards eyes. Infrared light at 808 nm is invisible.
- The manual recommends protective eyewear. Use eye protection specified by the manufacturer for this device.
- Before first use, read the entire manual, including the safety instructions and restrictions on use.
- Children must not operate the device. Keep it out of their reach.
- The device is not waterproof. Do not use it near water, immerse it or expose it to moisture.
- Use on clean, dry skin. Do not use on open wounds, damaged skin or areas showing signs of infection.
- Do not use directly over the thyroid gland.
- According to the supplied manual, the device must not be used during pregnancy, by children under 13, or by people with cancer, epilepsy, a pacemaker or a fever above 38 °C.
- Do not apply creams, oils, ointments or topical products to the area for at least one hour before use, as instructed in the manual.
- Do not use under the influence of alcohol or drugs, or when you may fall asleep or lose consciousness.
- If overheating, dizziness or discomfort occurs, switch off the device and stop using it. If symptoms persist, contact a doctor.
- Do not place the operating device with its light-emitting side against plastic, wood or other heat-sensitive surfaces.
- Do not use in the presence of flammable anaesthetic mixtures.
- Do not disassemble the device or attempt repairs yourself. In the event of a fault, contact the seller or service provider.
Cleaning and storage
Clean the exterior with a dry cloth. The supplied manual prohibits cleaning with water, liquid products, disinfectants or bleach.
Store the device in a dry place, away from direct sunlight and heat sources. Protect it from moisture and mechanical damage.
Manufacturer and contact details
Manufacturer according to the supplied documentation:
Shenzhen Sinoriko Technology Co., Limited
Room 702, Building A, Shenzhen Zhihui Innovation Center,
South of Taoyuanju, Qianjin 2nd Road, Xixiang Street,
Bao'an District, Shenzhen, China
Model: JM302
Seller contact:
info@kingray.sk
+421 914 15 09 09
Frequently asked questions
Does the device have a display?
No. The device uses button controls and indicator lights.
What types of light does the device use?
Red laser light at 650 nm and infrared laser light at 808 nm. Infrared light is invisible.
Can the power level and timer be adjusted?
Yes. There are three power levels and timer settings of 5, 10, 15 or 20 minutes. The permitted duration of use on a single area is governed by the manufacturer's instructions.
Can I clean the device with water?
No. The device is not waterproof. According to the manual, use a dry cloth to clean the exterior.
salonka17 Verified review
Verified review from a registered customer.


























