Water ionizer

Ionizers for direct installation on the tap. The ionizer is placed near the sink on the kitchen counter OR on the wall near the kitchen counter.

Installation of the water ionizer:

• Instead of the aerator, a two-way valve is installed and a hose is connected that leads to the ionizer and is simultaneously connected to the valve. The valve directs the flow of water. When washing dishes, put the valve in the normal vertical position and the water does not pass through the ionizer. By turning the valve to a horizontal position, you stop the flow of water through the aerator and the water passes through the ionizer - alkaline water flows out through the hose on the ionizer. Simply put, water either flows into the ionizer or through the aerator valve into the sink.
  Alkaline water flows out of the ionizer through a flexible hose that is connected to the top of the ionizer and can be bent, so you can direct the stream of water into a pitcher, sink, or glass. Acidic water flows into the sink through a rubber hose. Even a layman can handle the assembly.

Thanks to the ionizer, you have better water for your health!

Technical specifications:

Family Premier water ionizer suitable for every household.
Power: max 320 W depending on water quality.
Electrolysis: continuous with built-in water flow monitoring.
Ionization cell material: Flow rate 1-5 liters/min. Ideal flow 2 liters/min.
Ionization cell: Sintered platinum on Titanium, 5 plates, area 480cm2, fine ceramic membrane from Japan.
Built-in carbon filter from Japan.
Weight: approx. 4 kg.
Inlet water pressure: 0.1-0.65MPa.
Inlet water temperature: 2°C to 40°C..
Monitor: LCD display 3.5 inches, 7 colors.
Flow display: yes.
Automatic electrode cleaning: yes.
Water quality: Adjustable in a wide range of water quality.
Control: microcomputer.
Number of levels: 4 levels of alkaline and 2 levels of acidic water.
Hose: silicone for medical applications.
Achievable pH 4-10.5 depending on the pH and ORP and TDS of the input water. ORP also depends on the pH and ORP of the input water. The setting of the ionization power depends on the input water. As mineralization increases, the ionization strength may decrease.
The desired pH is programmed for each button separately.
The working range of TDS with acceptable efficiency is 80-850.

Measurement results: TDS of the inlet water is in the range: 180-200.

• input pH/ORP,
• output pH/ORP 7.71/+255mV, +8.65/-186mV,
• pH/ORP input, pH/ORP output: 7.75/+172mV, +9.08/-97mV,
• input pH/ORP, output pH/ORP: 7.8/+280mV, +9.28/-57mV,
• input pH/ORP, output pH/ORP: 7.8/+289mV, +8.86/-160 mV 1l/min and 8.71/-146mV at 2l/min.,
• The manufacturer's opinion on the results was that it is necessary to use a water softener and the parameters will improve.